Home >> News

How To Maintain the Smart Door Lock? These Six Tips Tell You

Pulished on Oct. 28, 2020


Nowadays, more and more users have replaced Smart Door Locks, but smart locks are different from mechanical locks. As high-tech electronic products, smart door locks also require careful care and maintenance in daily use. Regarding how to maintain, let’s look down


1. Make sure the fingerprint lock is clean and tidy


It is necessary to check the technical status of the lock body regularly. When collecting and registering fingerprints, the finger strength is moderate. Do not apply pressure. You can wipe the fingerprint collection window dust with a lens cloth, because after a long time of use, there will be dirt on the surface, which may affect normal use .


Check it every 3-6 months on average, and deal with it in time if any abnormalities are found. When loose or out-of-adjust parts are found, they should be tightened and adjusted in time, and some vulnerable parts should be replaced on a precautionary basis.


2. Protect the shell from scratches


The shell of Fingerprint Lock generally adopts zinc alloy and electroplating process. The electroplating process can achieve a perfect balance between wear resistance and aesthetics.


However, if you encounter hard objects, such as stones, blades, etc., scratches will easily occur, which will affect the appearance of the entire lock. Especially the acrylic digital panel, which is easy to wear, must be protected. Therefore, bear child, we must guard against it.


3. Enough lubrication to protect the lock cylinder


As one of the most important mechanical structures of a Low-Consumption Fingerprint Door Lock, the lock cylinder cannot be ignored.


When you find that the lock cylinder is not very flexible or cannot maintain the accurate position, you should fill the lock cylinder with lubricant in time. Pay attention when refueling. Use the oil gun to inject oil into the lock core, and not excessive. Roll the handle and knob until the door lock is activated.


Fingerprint Lock

Fingerprint Lock


4. Regularly check and replace the battery


When the fingerprint lock encounters low battery power, it will generally alarm in advance. Please replace the battery in time after hearing the alarm to avoid affecting normal use.


If it cannot be opened due to low battery, you can use emergency power bank or use the equipped emergency key to unlock.


5. Do not hang heavy objects on the handle


The handle is also an important part of a lock. Please don't hang heavy objects on the handle, it is best not to hang any objects, so as to avoid long-term pressure on the handle, which will damage the balance of the handle. As a result, the spring in the handle is stretched, and the handle naturally sags.


6. Firm lock body, pay attention to waterproof


If the shell comes into contact with liquid or salt spray, please wipe it dry with a soft, absorbent cloth or paper towel. You can also wipe the fingerprint collection window dust with a lens cloth, because after a long time of use, the surface will have dirt, which may affect normal use.


The above are the six tips about smart lock maintenance. Consumers only need to keep in mind, and daily maintenance of smart locks can enjoy the convenient life brought by smart locks.


TOP